Key Features of the WHT-Y Compressor Nebulizer

1. Continuous Operation — Built for Multi-Patient Clinical Use The WHT-Y is designed for continuous duty operation without the 30-minute rest cycles required by intermittent-duty home nebulizers. This makes it the correct choice for hospital respiratory therapy departments where the unit must run reliably through back-to-back patient treatment sessions without overheating or performance degradation. The robust piston compressor motor is rated for sustained clinical workloads.

2. MMAD 4 µm — Optimal Deep-Lung Drug Delivery The 4 µm MMAD ensures consistent medication delivery to the bronchioles and small airways, maximising the therapeutic efficacy of bronchodilators (salbutamol, ipratropium), corticosteroids (budesonide, beclomethasone), mucolytics (N-acetylcysteine), and other respiratory therapy medications delivered via the aerosol route.

3. Adjustable Nebulization Rate — 0.2 to 0.6 ml/min The WHT-Y's nebulization rate range of 0.2–0.6 ml/min provides clinical flexibility. Lower rates extend treatment duration for slow, deep-breathing protocols; higher rates reduce treatment time in acute care settings. The range accommodates both standard outpatient aerosol therapy sessions (typically 5–10 minutes) and extended therapy protocols for severe COPD or cystic fibrosis management.

4. High Working Airflow — >6 L/min A working airflow exceeding 6 L/min ensures efficient aerosol generation throughout the nebulization cycle. Adequate airflow maintains consistent particle size and prevents medication residue from accumulating in the nebulizer cup — maximising drug delivery efficiency and minimising medication wastage.

5. Low Noise — < 65 dB(A) At < 65 dB(A), the WHT-Y operates at a level comparable to a normal conversational voice — low enough for use in shared ward environments, recovery rooms, and paediatric treatment areas without causing distress to patients or disrupting clinical staff. This is particularly valuable during extended treatment sessions or when treating anxious paediatric patients.

6. Ultra-Compact and Lightweight — 1.5 kg, 188 mm Despite its continuous-use clinical specification, the WHT-Y is remarkably compact and portable at 1.5 kg and 188 × 106 × 188 mm. It fits comfortably on a bedside table, clinic trolley, or outpatient treatment desk without occupying excessive space. The lightweight design also allows easy relocation between treatment bays.

7. Adult and Paediatric Compatible The WHT-Y includes both adult face mask and child face mask accessories, making it immediately suitable for respiratory therapy in patients of all ages — from paediatric bronchiolitis and asthma to adult COPD and post-operative airway management.

8. Dual Voltage — Global Market Ready Full support for both AC 220V/50Hz and AC 110V/60Hz makes the WHT-Y exportable to any global market without modification. Custom plug types are available per destination country.

Clinical Applications & Use Scenarios

Hospital Respiratory Therapy Wards — Continuous Multi-Patient Use The WHT-Y's continuous operation rating makes it ideal for hospital inhalation therapy departments where the device runs through consecutive patient sessions. Bronchodilator therapy for acute asthma exacerbations, COPD management, and post-operative airway humidification are the primary clinical applications. The 4 µm MMAD ensures bronchodilators such as salbutamol and ipratropium bromide are efficiently deposited at the bronchiole level.

Respiratory & Pulmonology Clinics For outpatient respiratory clinic nebulizer use, the WHT-Y provides the reliable, consistent aerosol output required for scheduled nebulizer therapy sessions. Its compact dimensions fit easily into clinic treatment rooms, and the continuous operation capability prevents downtime between patients.

Paediatric Units & Neonatal Care The < 65 dB noise level and child-specific mask accessories make the WHT-Y appropriate for paediatric nebulizer therapy — including bronchiolitis management in infants, asthma treatment in school-age children, and cystic fibrosis nebulized antibiotic therapy. The quiet operation reduces treatment anxiety in young patients, improving compliance.

ENT Clinics For upper respiratory tract treatment — sinusitis, rhinitis, pharyngitis, and laryngitis — the 0.5–10 µm particle range and adjustable nebulization rate allow the WHT-Y to be used effectively for nasal and pharyngeal aerosol therapy in ENT outpatient settings.

Emergency Departments — Acute Bronchospasm In emergency settings, the WHT-Y delivers rapid bronchodilator aerosol for acute asthma attack management, COPD exacerbation treatment, and anaphylactic bronchospasm. The continuous operation capability ensures the device can be used repeatedly across multiple patients during high-demand periods without rest intervals.

Home Care with Nursing Supervision For patients with severe chronic respiratory conditions managed at home under nursing supervision, the WHT-Y's continuous-use rating, low noise, and compact size provide a reliable alternative to larger hospital-grade units.

How to Use the WHT-Y Compressor Nebulizer

1. Prepare the medication: Measure the prescribed liquid medication dose and add it to the nebulizer cup. Do not exceed the maximum fill line. Add normal saline diluent if required to reach the clinician's prescribed volume (typically 2.5–4 ml for standard treatments).
2. Assemble the nebulizer kit: Attach the nebulizer cup to the T-piece. Connect the adult mask, child mask, or mouthpiece to the T-piece depending on patient age and clinical protocol. Ensure all connections are snug.
3. Connect tubing: Attach the air tubing between the air outlet port of the WHT-Y and the inlet of the nebulizer cup.
4. Power on: Connect the power cord to the appropriate mains supply (220V or 110V). Switch the unit on using the power button/switch.
5. Begin treatment: Position the mask on the patient's face (or mouthpiece in patient's mouth). Ask the patient to breathe slowly and deeply through the mouth, with relaxed exhalation. Inhalation should be steady — not forced — to optimise aerosol deposition in the lower airways.
6. Monitor treatment: Observe for aerosol mist from the mask or mouthpiece. Treatment is complete when the nebulizer cup begins to splutter (indicating near-empty medication residue), typically 5–10 minutes for a 3 ml fill.
7. Post-treatment: Switch off the unit. Disassemble the nebulizer cup, T-piece, and mask. Clean per the maintenance protocol below.

OEM & Wholesale Supply

YIDE offers complete compressor nebulizer OEM and ODM manufacturing for the WHT-Y:

• Custom brand logo, product name, and housing colour
• Custom packaging: neutral export carton, OEM retail box, or branded packaging
• Accessory customisation: mask styles, medication cup capacity, tubing length
• Voltage and plug configuration per destination country
• User manual translation and localisation in any language
• CE and FDA regulatory documentation for your market registration
• Flexible MOQ: sample units accepted; wholesale pricing from 50+ units

As a hospital nebulizer machine manufacturer supplying factory-direct, YIDE serves distributors, hospital procurement agencies, and medical device importers in Africa, the Middle East, Southeast Asia, Latin America, and Europe.

Contact YIDE to request the WHT-Y technical data sheet, CE/FDA documentation, or a factory-direct wholesale quotation.